Engineered to international AS2047, CE, and NFRC compliance for residential, commercial, and architectural facade applications worldwide.
Operating since 1993, Window Wurx Industry Co., Ltd. delivers direct factory engineering, rigorous international testing standards, and tailored structural systems for major building developments globally.
Utilizing high-density PA66-GF25 structural nylon thermal strips, our window profiles interrupt conductive heat paths, keeping interior spaces thermally regulated and drastically lowering building U-values.
Every product range undergoes mechanical stress, air infiltration, and water pressure testing. Independently certified to meet strict Australian (AS2047 / AS1288) and European (CE EN 14351-1) building codes.
From dual-color anodizing and fluorocarbon (PVDF) powder coating to complex non-standard structural glass assemblies, our dedicated engineering team provides millimetric shop drawings for complete project alignment.
Comprehensive engineering comparison matrix designed for facade consultants, project procurement directors, and building inspectors.
| System Architecture | Thermal Transmittance (U-Value) | Acoustic Rating (STC / Rw) | Structural Wind Pressure (Pa) | Water Tightness (Pa) | Primary Commercial Application |
|---|---|---|---|---|---|
| 65mm Heavy-Duty Thermal Break Casement | 1.4 - 1.8 W/m²K | STC 38 - 42 dB | 4500 Pa (N6 Category) | 700 Pa (Class E700) | High-rise residential, Luxury coastal villas |
| 120mm Minimalist Ultra-Slim Sliding System | 1.6 - 2.0 W/m²K | STC 35 - 39 dB | 3500 Pa (C4 Rating) | 450 Pa (Class E450) | Panoramic balconies, Resort patio enclosures |
| Heavy Architectural Bifolding Accordion Doors | 1.8 - 2.2 W/m²K | STC 34 - 38 dB | 3000 Pa | 400 Pa | Hospitality venues, Open-plan living spaces |
| Hurricane Impact Laminated Double Glazed | 1.5 - 1.9 W/m²K | STC 40 - 45 dB | 6000+ Pa (ASTM E1996) | 900 Pa (Class E900) | Tropical storm zones, Commercial facade envelopes |
| Aluminium-Clad Solid Wood Composite | 1.1 - 1.5 W/m²K | STC 40 - 44 dB | 3500 Pa | 600 Pa | Passive house construction, Cold climate estates |
The double-glazing configuration determines thermal reflection and light transmission. Standard build-ups utilize 5mm Tempered Glass + 12A (Air/Argon Gap) + 5mm Tempered Glass. Advanced configurations incorporate:
Structural longevity relies on hardware precision. Window Wurx integrates premium German-engineered hardware (CMECH, SIEGENIA, ROTO, HOPO) tested for over 50,000 continuous opening cycles.
From primary aluminium alloy extrusions to 5-layer export protective packaging, every step is rigorously monitored to prevent job-site delays or transit damage.
Our 20,000 square meter Foshan manufacturing hub houses three automated CNC machining centers. Profiles are cut to 0.1mm tolerances, while high-pressure hydraulic corner crimping infused with two-component structural sealant ensures impenetrable frame joints.
Every batch of window and door frames undergoes quality control inspections prior to glass unit insertion. Air permeability, static water penetration, and structural deflection are verified in accordance with AS2047 N6 load requirements.
International sea transport subjects building materials to humidity, container movement, and extreme vibration. Our 5-layer protective packing protocol eliminates corner damage, glass cracking, and surface scratching during transoceanic transit.
Strategic foresight into how changing building codes, net-zero mandates, and architectural aesthetics are reshaping global procurement.
With strict net-zero operational carbon targets taking effect across Europe, Australia, and North America, window specs are shifting toward overall system Uw values below 0.8 W/m²K. Importers are increasingly specifying triple glazed Low-E units integrated with aerogel thermal breaks and composite warm-edge spacers to comply with modern Green Star and LEED v4 certifications.
Modern architectural design favors maximum natural day-lighting and frameless visual transitions. Sourcing trends show a 40% year-on-year demand surge for invisible interlocking stiles (under 20mm visible width) and floor-to-ceiling structural fixed glass corners with zero vertical mullions, requiring specialized high-modulus silicone structural glazing.
The integration of IoT automation within facade engineering allows for smart dynamic tinting glass (electrochromic glass) and motorized concealed actuators. Windows dynamically adjust solar heat gain (SHGC) based on real-time climate sensor data and tie directly into centralized Building Management Systems (BMS).
Aluminium stands out as an endlessly recyclable building material without structural degradation. Top global buyers demand verifiable material passports documenting the use of post-consumer recycled aluminium billets and eco-friendly chrome-free surface passivation treatments during profile manufacturing.
Expert answers covering technical compliance, custom engineering capabilities, logistics, and quality assurance protocols when importing double glazed windows from China.
To comply with Australian building regulations, aluminium windows must be independently tested and certified to AS2047 (Windows and external glazed doors in buildings) and AS1288 (Glass in buildings selection and installation), covering structural deflection (N1 to N6 wind ratings), water penetration, and air infiltration. For the European Union, products must carry full CE Marking (BS EN 14351-1), with Factory Production Control (FPC) documentation verifying thermal U-values, wind load resistance, and acoustic performance ratings.
Standard extruded aluminium is highly conductive, allowing exterior heat or cold to transfer rapidly into a building interior. A thermal break profile utilizes a precision-engineered structural polyamide strip (typically PA66-GF25 reinforced with 25% glass fiber) mechanically crimped between the outer and inner aluminium extrusions. This continuous thermal barrier drastically lowers the thermal conductivity of the frame, preventing condensation buildup, reducing HVAC energy consumption, and lowering overall U-values from over 5.0 W/m²K down to 1.4 W/m²K.
Yes. As a direct custom manufacturer operating 3 automated CNC lines, Window Wurx builds every unit to exact project shop drawings. We support custom frame geometry (arched, triangular, irregular corner windows), specialized opening hardware, and dual-color powder coating / anodizing. Dual-color finishing allows the exterior aluminium profile to match building exterior cladding while the interior surface matches internal architectural woodwork or wall colors.
Fogging occurs when moisture enters the interstitial cavity due to seal failure. Our double glazed units feature dual-seal construction: a primary seal of high-adhesion Polyisobutylene (PIB) combined with a secondary structural silicone or polysulfide sealant backbedding. Molecular sieve desiccant inside the aluminum warm-edge spacer absorbs ambient moisture. For high-altitude shipments, equalizer capillary tubes are installed during factory production to equalize pressure differences during transit and prevent glass bowing.
Products are protected using our strict 5-layer export packaging: 1) Surface protective adhesive film, 2) Shock-absorbing EPE foam wrapping, 3) Rigid plastic corner guards, 4) Heavy corrugated cardboard exterior wrap, and 5) Fully enclosed fumigation-free plywood crates. Units are stacked vertically inside containers using custom wooden bracing, rubber dampening pads, and ratcheted cargo straps to eliminate container movement.
Standard production lead time is 25 to 35 calendar days following official CAD shop drawing approval and deposit receipt. Lead times may vary based on custom powder coating colors (e.g., custom RAL colors requiring specialized batch coating), specialized hurricane-impact laminated glass sourcing, or large multi-container order quantities.
We partner with top-tier hardware manufacturers including German brands SIEGENIA, ROTO, GU, and premium architectural hardware suppliers like CMECH and HOPO. All standard hardware carries a minimum 10-year functional mechanical warranty, while aluminium frame extrusions and powder coat finishes carry warranties ranging from 10 to 25 years depending on surface coating specification (PVDF vs. standard thermosetting polyester powder).
Importers, architects, and developers can click the Inquire Now button to submit window schedules, architectural elevations, or DWG drawings. Our technical engineering desk evaluates wind load demands, glass specifications, and thermal requirements to return a detailed factory-direct quotation within 24 business hours.
Collaborate with Window Wurx Industry Co., Ltd. for factory-direct engineering support, customized shop drawings, and AS2047/CE certified double glazed aluminium window production.
Inquire Now