At Window Wurx Industry Co., Ltd., we manufacture structural-grade aluminum exterior doors engineered to withstand severe weather, optimize thermal efficiency, and provide certified security for modern residential and commercial envelopes.
Advanced low-threshold designs integrating multi-layer EPDM seals and concealed drain channels to eliminate water penetration under heavy storm conditions.
Engineered with 3 to 7 locking points made of solid stainless steel, delivering high anti-forced-entry performance and structural seal compression.
Heavy-duty hydraulic pivot systems capable of supporting glass panels up to 500kg, ideal for grand entranceways requiring sleek sightlines.
Built with 6063-T6 aluminum alloys and laminated impact-resistant glass, meeting structural requirements for coastal windborne debris regions.
Combining heavy-gauge stainless steel internal cores with precision-machined aluminum outer finishes for extreme structural defense and elegance.
Double-opening casement doors featuring slim aluminum profiles, continuous weatherstripping, and high thermal insulation for residential patios.
Every exterior door manufactured by Window Wurx Industry Co., Ltd. undergoes rigorous quality control and custom structural calculation prior to fabrication.
| Performance Feature | Technical Parameter | International Standard |
|---|---|---|
| Aluminum Alloy Profile | High-precision 6063-T6 / 6060-T66 aluminum extrusions (2.0mm - 3.0mm wall thickness) | GB/T 5237 / EN 755 |
| Thermal Insulation System | PA66-GF25 reinforced polyamide thermal break strips with multi-cavity insulation fill | ISO 10077-2 / EN 14024 |
| Glass Configuration | Double or triple tempered glass (5mm+12A+5mm / Low-E / Argon Gas / Laminated Impact) | ASTM C1048 / EN 12150 |
| Sealing & Gaskets | Continuous ternary EPDM vulcanized rubber weather seals with co-extruded corners | DIN 7863 / ISO 3939 |
| Surface Finishing | Qualicoat-certified Powder Coating, PVDF Fluorocarbon, or Anodized Sandblasting | AAMA 2604 / AAMA 2605 |
| Hardware Integration | German Siegenia, Hoppe, GU, or custom heavy-duty multi-point locking systems | EN 13126 / PAS 24 |
Key information for commercial contractors, importers, and architects ordering directly from our Foshan facility.
Our aluminum exterior doors are tested and certified to meet Australian AS2047 standards and European CE marking (EN 14351-1). Full mill test certificates, structural calculations, and glass compliance documents are provided for site approval.
Yes. We provide complete OEM/ODM customization. Aluminum profiles can be customized in dimensions, mullion layouts, hardware selections, and finished with RAL colors, textured powder coats, or two-tone finishes.
Our engineering team utilizes submerged drainage sub-frames, heavy-duty threshold drops, dual EPDM compression seals, and concealed weeping holes tested under dynamic pressure to prevent water ingress in heavy windstorms.
Each door frame and sash is wrapped in protective PE film, reinforced with high-density foam corner protectors, and packed into fumigation-free solid plywood crates to guarantee damage-free arrival at destination ports.
Contact our engineering specialists for structural advice, shop drawings, and direct factory pricing. Email us at [email protected].