Factory-direct architectural glazing engineered for hurricane resistance, thermal efficiency, acoustic dampening, and high-traffic industrial applications.
Operating from Nanhai District, Foshan City—the worldwide epicenter of architectural aluminum profile manufacturing—Window Wurx Industry Co., Ltd. has established an unassailable benchmark in direct OEM/ODM fenestration engineering since 1993. Over three decades of concentrated metallurgical refinement, structural glass integration, and computer-numerical-control (CNC) machining allow us to bridge the gap between high-concept architectural drawings and flawless physical building envelopes.
Modern commercial and residential developments no longer accept cookie-cutter door and window dimensions. Thermal regulations are tightening under global Net-Zero initiatives, while structural wind-load requirements in coastal zones demand higher inertia moments from aluminum profiles. As a vertical OEM/ODM manufacturing facility, we solve these technical friction points by maintaining total control over extrusion alloy mixing (primarily 6063-T5 and structural 6063-T6 grades), polyamide thermal barrier strip insertion, surface treatment line control, and insulated glass unit (IGU) glazing assembly.
We craft custom structural dies for non-standard profile geometries, narrow sightline Crittall profiles, heavy-duty lift-and-slide tracks, and structural curtain wall mullions.
Integrating PA66GF25 polyamide thermal break strips with double/triple glazed Low-E acoustic laminate glass, achieving thermal transmittance down to Uf ≤ 1.1 W/m²K.
Every sash and frame undergoes water tightness (EN 12208), air permeability (EN 12207), structural wind resistance (EN 12210), and hardware cycle endurance testing.
Our 20,000-square-meter facility houses 3 fully automated, intelligent production lines operating under the MLX550 series protocol. By eliminating manual error during corner crimping, lock-pocket milling, and drainage hole punch operations, we achieve zero-error alignment across large-span aluminum doors.
Selecting the appropriate aluminum profile depth, thermal break configuration, and glass specification is critical to fulfilling local building codes (e.g., AS2047 in Australia, CE EN14351-1 in Europe, Florida Product Approval for Hurricane Impact). Below is an engineering comparison matrix of our major OEM system lines:
| System Type | Profile Depth | Thermal Transmittance (U-Value) | Acoustic Rating (Rw) | Maximum Wind Load | Primary OEM Application |
|---|---|---|---|---|---|
| Slim Frame French / Crittall Door | 45mm - 65mm | 2.2 - 2.8 W/m²K (Non-Thermal) | 32 dB - 38 dB | 1.8 kPa | Interior Lounges, Bedrooms, Modern Villa Entrances |
| Heavy Duty Thermal Break Sliding Door | 120mm - 190mm | 1.2 - 1.6 W/m²K (Thermal) | 40 dB - 44 dB | 3.5 kPa | Luxury Balconies, Patio Enclosures, Hotel Terraces |
| Hurricane Impact Balcony Window/Door | 80mm - 110mm | 1.4 - 1.8 W/m²K (Impact Thermal) | 42 dB - 48 dB | 5.0 kPa (Large Missile Impact) | Coastal Resorts, High-Rise Hotels, Cyclone Zones |
| Industrial High-Speed Spiral Roll-Up Door | 22mm Slat Thickness | R-Value 12.5 (PU Foamed) | 28 dB | 2.2 kPa (120 km/h wind) | Cold Storage, Food Processing Plants, Cleanrooms |
| Intelligent Electric Skylight / Curtain Wall | 140mm - 220mm | 1.0 - 1.4 W/m²K (Triple Glazed) | 45 dB | 4.5 kPa | Commercial Atriums, Sunrooms, Modern Roof Glazing |
Aluminum is inherently a highly conductive material. To overcome this physical limitation, our engineering division implements high-precision Polyamide (PA66GF25) reinforced thermal break bridges that mechanically isolate the exterior aluminum chamber from the interior profile frame.
Combined with gas-filled double or triple insulated glass units (IGU) incorporating Low-Emissivity (Low-E) pyrolytic coatings and warm-edge spacer technology, our aluminum glass doors drastically minimize thermal conduction and radiation heat gain in hot climates, while locking in thermal comfort during freezing winter conditions.
As commercial property developers, architects, and international importers re-evaluate their supply chain strategies, the global market for customized aluminum fenestration is undergoing rapid structural shifts. Procuring direct from a technologically advanced OEM factory requires aligning with these macro trends:
Architectural design has shifted decisively toward glass-dominant envelopes. Minimalist structural aluminum doors featuring sightline profiles as slim as 16mm to 25mm are taking over luxury residential projects. Expect increased demand for fully concealed outer sub-frames embedded directly into surrounding masonry.
Mechanical keys and manual sliding sashes are rapidly giving way to motorized drive channels integrated into home automation systems. Heavy-duty aluminum sliding and folding doors are increasingly requested with concealed electric actuators, fingerprint access control, auto-sensing rain sensors, and remote app operation.
Climate unpredictability is accelerating the adoption of storm-resilient glass assemblies. Monolithic tempered glass is being superseded by SentryGlas® (SGP) and PVB laminated safety glass. High-end buyers now demand impact-tested aluminum door frames capable of resisting hurricane debris impacts without structural yield.
European and North American building codes are requiring lower embodied carbon metrics. Recycled aluminum billets (secondary smelting) reduced power consumption profiles, coupled with green building certifications (LEED/BREEAM), are becoming standard bid criteria for large-scale international tenders.
The engineering quality of an aluminum door is only as good as its condition upon job-site arrival. Long-haul ocean transit presents harsh challenges: humidity, container sway, drop hazards, and customs handling.
At Window Wurx Industry Co., Ltd., every single door unit undergoes our rigorous 5-layer export packaging protocol:
We welcome international buyers, procurement managers, and architectural consultants to inspect our production floor, hardware testing labs, and completed window & door mockups in Foshan.
Direct answers to essential technical, logistic, and commercial questions asked by international importers, developers, and contractors when sourcing from China.
Our structural aluminum profiles, thermal break assemblies, and insulated glass units carry comprehensive international compliance certificates. We hold standard testing under AS2047 (Australia), CE EN14351-1 (European Union), NFRC / AAMA (North America), and ISO9001 quality management standards. Certified lab test reports covering structural deflection, water penetration resistance, air infiltration, and acoustic ratings are provided alongside project quotations.
Yes. As a true OEM/ODM manufacturer, we operate a dedicated CAD/BIM engineering team. If your project specifies a proprietary extrusion geometry, custom structural mullions, or specialized track configurations, we can design, machine, and test custom steel extrusion dies within 15 to 20 business days.
We primarily utilize primary 6063-T5 and structural 6063-T6 aluminum alloys. Surface treatment options include Fluorocarbon (PVDF) spray coating compliant with AAMA 2605 specifications (guaranteeing against fading for up to 20 years in extreme sun/coastal environments), electrostatic powder coating, anodizing (15-25 microns), and Italian thermal-transfer woodgrain finishes.
Because our thermal break doors utilize separate interior and exterior aluminum profiles connected via a central polyamide strip, we can finish the exterior aluminum frame in a dark weather-resistant PVDF finish (e.g., Matt Black or Charcoal Gray) while finishing the interior frame in a warm interior woodgrain or soft white finish to complement internal interior design schemes.
Standard OEM production lead time is 25 to 35 calendar days following the final approval of shop drawings and color samples. For large-scale commercial real estate developments requiring multi-container shipments, we establish staggered production schedules aligned with your job-site construction milestones.
We provide full structural corner samples (showing aluminum thickness, thermal break bridge, rubber gasket sealing, and glass cross-section) as well as complete color swatch fans. Samples are packed securely and shipped via express courier (DHL/FedEx/UPS) for rapid engineering evaluation.
Transform your architectural vision into reality. Send us your door schedules, CAD elevation drawings, or project tender specifications—our engineering team will deliver a comprehensive technical analysis and competitive factory quotation within 24 hours.
Get a Quote