Precision-engineered extruded aluminum window systems fabricated in our 20,000 m² Foshan manufacturing facility. Available for OEM custom dimensions, anodized/PVDF finishes, and wholesale architectural supply.
In global commercial and residential architecture, the selection of window envelope systems requires a meticulous balance of structural integrity, cost efficiency, thermal performance, and compliance with regional fenestration codes. As a leading primary source manufacturer based in Foshan, China—the global epicenter of architectural aluminum extrusion—Window Wurx Industry Co., Ltd. has spearheaded modern OEM/ODM single pane and vertical sliding window solutions since 1993.
While multi-glazed thermal break assemblies dominate cold-climate specifications, high-grade OEM aluminum single pane sliding windows remain an indispensable architectural choice across tropical, subtropical, moderate coastal regions, and specific budget-conscious commercial developments. When engineered with prime 6063-T5/T6 alloy profiles and tempered safety glass, single pane sliding fenestrations deliver unparalleled structural slimness, superior light transmission metrics, low dead-weight loading on high-rise structures, and cost-effective capital expenditure.
Extruded using 6063-T5/T6 architectural aluminum alloy with profile wall thicknesses ranging from 1.4mm to 1.8mm, ensuring high tensile strength and wind-load resistance exceeding ASTM E330 standards.
Integrates 5mm to 12mm monolithic toughened glass (BS EN 12150 / ANSI Z97.1) or ceramic-coated Low-E single panes designed for high solar reflection and mechanical impact durability.
Equipped with heavy-duty stainless steel 304/316 dual-conical roller bearings tested to 100,000 operational cycles, providing whisper-quiet sliding mechanics and zero track-friction sag.
To assist architectural specifying officers, commercial importers, and facade contractors in conducting thorough value-engineering evaluations, the structural and thermal performance baseline of Window Wurx single pane sliding systems is detailed below:
| Performance Parameter | Standard Single Pane Sliding | Reinforced Commercial Sliding | International Standard Compliance |
|---|---|---|---|
| Frame Profile Alloy | 6063-T5 Extruded Aluminum | 6063-T6 High-Tensile Aluminum | GB/T 5237, EN 755 |
| Nominal Wall Thickness | 1.2mm – 1.5mm | 1.8mm – 2.0mm Heavy Duty | AS 2047, BS 4873 |
| Glazing Specification | 5mm / 6mm Clear Tempered | 8mm / 10mm Low-E Tempered | ANSI Z97.1, EN 12600 |
| Air Infiltration Resistance | 0.15 cfm/ft² at 1.57 psf | 0.08 cfm/ft² at 1.57 psf | ASTM E283 / AS 4420.2 |
| Water Penetration Pressure | 250 Pa (5.2 psf) | 450 Pa (9.4 psf) | ASTM E331 / AS 4420.3 |
| Structural Wind Load (DP) | ± 1500 Pa (Design Pressure 30) | ± 3500 Pa (Design Pressure 70) | ASTM E330 / AS 4420.4 |
| Acoustic Attenuation (STC) | 26 dB – 28 dB | 30 dB – 32 dB (Laminated Single) | ISO 717-1 / ASTM E413 |
| Surface Finish Options | Powder Coating (Qualicoat Class 1) | PVDF Fluorocarbon / Anodized 25μm | AAMA 2604 / AAMA 2605 |
The international building envelope procurement landscape is undergoing a systemic shift driven by carbon border adjustments, stringent local building codes, and digitized B2B supply chain integrations. Importers, property developers, and wholesale hardware distributors must adapt to three core macro-trends over the coming decade:
Global buyers are increasingly mandating Environmental Product Declarations (EPDs) and low-embodied-carbon aluminum profiles. Primary aluminum smelted using hydroelectric power—combined with recycled scrap (post-consumer aluminum)—reduces carbon footprints by up to 70%. Window Wurx leads this transition by integrating green aluminum billets into our OEM production lines.
Design for Manufacture and Assembly (DfMA) is revolutionizing site-level window installation. Pre-punched, sub-assembled single pane horizontal and vertical sliding windows equipped with modular head/sill receptors enable rapid installation on construction sites, cutting labor costs by over 35% in high-wage markets across North America, Europe, and Australia.
The market is demanding advanced single-pane monolithic glass solutions that incorporate invisible pyrolytic Low-E hard coats and solar-reflective spectrally selective coatings. These allow single pane sliding windows to deliver thermal performance metrics previously attainable only through double-pane assemblies, making them highly desirable for warm climates.
Headquartered in Nanhai District, Foshan City—Guangdong Province, China—Window Wurx Industry Co., Ltd. has grown from a specialized aluminum extrusion workshop established in 1993 into a global premier manufacturer of architectural glazing systems, sunrooms, structural curtain walls, and custom OEM/ODM window assemblies.
Operating across a modern 20,000 square meter factory space powered by three automated CNC profile cutting and corner-crimping production lines, our facility maintains a monthly output capacity exceeding 45,000 square meters of window units. Over 150 certified technicians and senior facade engineers oversee production quality under ISO9001 quality management protocols.
Our in-house surface treatment shop offers over 200 RAL powder coating colors, anodized matte/gloss treatments, wood-grain thermal transfer prints, and PVDF coatings resistant to marine salt-spray corrosion.
Navigating foreign trade regulations requires absolute documentation reliability. Window Wurx products undergo rigorous third-party physical testing to ensure continuous compliance with world-class standards:
Cross-border ocean freight poses severe threats to structural aluminum sashes and glass integrity through ocean humidity, container vibration, and rough port handling. Window Wurx implements a proprietary 5-Layer Packaging Standard for all international LCL and FCL shipments:
Every aluminum surface is wrapped with a 0.07mm UV-resistant protective adhesive film to prevent scratch damage during fabrication, followed by complete encasement in shock-absorbing polyethylene foam sheets.
Heavy-duty plastic corner guards reinforce all profile joints against impact. The entire unit is then sealed in multi-layer waterproof air-bubble wrap to seal out marine humidity and salt spray.
Units are loaded into non-coniferous, ISPM-15 compliant fully enclosed plywood crates equipped with internal rubber dampeners and steel band strapping, ensuring 100% smooth customs clearance worldwide.
Technical and commercial clarity regarding custom OEM orders, minimum quantities, lead times, and warranty coverage.
Our standard production MOQ is 50 square meters for standard anodized or powder-coated profiles. For custom die-extrusion profiles tailored to your exclusive architectural system drawings, the MOQ is 1 metric ton of aluminum profile development, with die-creation lead times of 10–14 days.
Every window system batch undergoes factory internal testing for deflection, air tightness, and water penetration before dispatch. Official NATA-accredited test reports (Australia) and notified body CE certificates are provided alongside shop drawing sign-offs prior to mass production.
Yes. By specifying Low-E coated monolithic glass (such as hard-coat pyrolytic Low-E) combined with high-grade EPDM double-compression weatherstripping, solar heat gain coefficient (SHGC) values can be reduced significantly to meet building code energy targets in southern and tropical zones.
We partner with top-tier hardware manufacturers worldwide. Clients can choose from premium domestic brands (Kin Long, Guoqiang) or top European hardware systems (HOPO, ROTO, SIEGENIA) featuring anti-burglary multi-point crescent locks, flush latches, and heavy-duty stainless rollers.
Upon approval of shop drawings and receipt of deposit, standard production lead time is 25 to 35 calendar days. Accelerated 20-day production schedules are available for urgent commercial developments utilizing standard profile dies.
We back our products with a 10-year warranty on aluminum structural extrusions and surface powder coatings, a 5-year warranty on glass units against sealant failure, and a 3-year warranty on hardware moving parts under normal operating conditions.
Connect directly with our engineering team in Foshan. Submit your CAD drawings, architectural schedules, or OEM specifications for an accurate factory-direct estimate within 24 hours.
Contact Us