Direct factory supply manufactured in Foshan, certified to international standards for commercial, residential, and mega-development projects across Riyadh and the Central Province.
Riyadh and the broader Central Region (Najd Plateau) present some of the most aggressive environmental challenges in global structural engineering. With ambient summer shade temperatures routinely surpassing 48°C to 52°C, combined with direct solar irradiance reaching up to 1,000 W/m² and intense diurnal temperature shifts (dropping by as much as 25°C in desert nightfall), standard fenestration products fail within 36 to 60 months due to thermal expansion stress, seal degradation, and UV-induced coating chalking.
As a specialized manufacturer and exporter serving Saudi Arabian developers, facade consultants, and main contractors, Window Wurx Industry Co., Ltd. custom-engineers high-performance aluminium single windows (including single hung, single casement, and fixed structural units) designed specifically to satisfy the Saudi Building Code (SBC 601 / SBC 602 Energy Conservation Requirements) and SASO (Saudi Standards, Metrology and Quality Organization) certifications.
Key Technical Threshold for KSA Procurement: Fenestration units deployed in Riyadh Zone 1 building envelopes must achieve a Solar Heat Gain Coefficient (SHGC) ≤ 0.20 and an overall U-value ≤ 1.6 W/m²K to mitigate HVAC load spikes and withstand sandstorm-driven particulate abrasion.
Uninsulated aluminium extrusions act as rapid thermal conductors, transferring extreme radiant heat directly into interior air-conditioned spaces. Window Wurx single window systems utilize multi-chambered 6063-T6 architectural aluminium profiles fitted with imported 24mm to 34mm PA66 GF25 (25% fiberglass reinforced polyamide) thermal break strips. This mechanical separation breaks the conductive bridge, preventing thermal bridging and drastically reducing energy consumption across residential villas in Al-Malqa, commercial towers in Olaya, and gigaprojects aligned with Saudi Vision 2030.
Riyadh experiences seasonal sandstorms (Haboob) where atmospheric dust particles (PM10 and PM2.5) are driven by sustained wind pressure exceeding 1,200 Pa. Traditional vinyl or low-grade rubber seals degrade rapidly under high UV indices (UV Index 11+). Window Wurx single windows incorporate continuous, co-extruded EPDM (Ethylene Propylene Diene Monomer) weatherstripping combined with multi-point perimeter locking hardware. This creates a hermetic seal achieving Class 4 Air Permeability (EN 12207) and Class E1050 Water Tightness (EN 12208).
Over three decades of precision manufacturing in Foshan, China, exported directly to Riyadh, Jeddah, Dammam, and NEOM project sites.
Surface treatments specifically formulated to withstand high UV radiation and extreme desert heat without fading, chalking, or cracking. Guaranteed color retention over 15 to 25 years.
Complete flexibility in frame depth (60mm to 120mm), glazing stop geometry, dual-tone anodizing (outside bronze/grey, inside woodgrain), and non-standard rough opening dimensions.
Each unit undergoes 5-layer protective wrapping, corner guards, fumigation-free solid timber crates, and internal container bracing designed for long-haul maritime transport to Dammam / Jeddah ports and overland trucking to Riyadh dry port.
Independently tested for acoustic reduction (up to STC 45 dB), structural wind load (up to 3000 Pa), and air infiltration, providing frictionless code approval by KSA Municipality engineers.
Argon-filled insulated glass units (IGU) featuring double or triple silver Low-E coatings that reflect infrared heat energy back to the exterior while permitting optimum visible light transmittance (VLT).
Eliminate middleman markups. Direct supply chain control from our 20,000 m² automated facility allows bulk pricing structures tailored for high-volume residential compounds and hotel infrastructure.
Selection of fenestration systems for Riyadh projects requires precise verification of physical performance values. The table below details engineered ratings across our key product lines supplied to the Middle East market.
| System Series | Frame Depth | Thermal Break | U-Value (W/m²K) | SHGC Range | Acoustic Rating | Wind Pressure Resistance |
|---|---|---|---|---|---|---|
| Single Casement Window (System 65) | 65 mm | 24 mm PA66 | 1.4 - 1.7 | 0.18 - 0.22 | 38 - 42 dB | 2,500 Pa (Class P4) |
| Vertical Single-Hung Window | 80 mm | 20 mm PA66 | 1.6 - 1.9 | 0.20 - 0.24 | 35 - 39 dB | 2,000 Pa (Class P3) |
| Heavy-Duty Sliding Door & Window | 120 mm | 28 mm PA66 | 1.3 - 1.6 | 0.15 - 0.19 | 40 - 44 dB | 3,000 Pa (Class P5) |
| Structural Fold-Up & Bi-Fold System | 75 mm | 34 mm PA66 | 1.2 - 1.5 | 0.16 - 0.20 | 42 - 45 dB | 2,800 Pa (Class P4) |
| Unitized Curtain Wall Module | 150 mm | 34 mm PA66 | 1.1 - 1.4 | 0.14 - 0.18 | 45 - 48 dB | 3,500+ Pa (Class P5+) |
* Note: U-Values and SHGC ratings are calculated based on double-pane Low-E glass units configured with 6mm Toughened + 12mm Argon Spacer + 6mm Toughened glass build-up. Custom triple-glazed acoustic laminates available on request.
The urban landscape of Riyadh is undergoing unprecedented transformation driven by Saudi Vision 2030 initiatives, including the Diriyah Gate Development, King Salman Park residential fringes, Qiddiya Entertainment City, and extensive villa developments in North Riyadh (such as Al-Yasmin, Al-Narjis, and Dahiat Khuzam). Fenestration design in these developments requires a sophisticated balance between traditional Najdi architectural heritage and ultra-modern thermal isolation performance.
Architects working on heritage-inspired luxury villas and cultural projects frequently specify 3D Wood Grain and Textured Anodized powder coatings on aluminium single windows. Window Wurx utilizes advanced fluorocarbon coating and vacuum transfer timber finishing that replicates raw desert oak or walnut wood aesthetics while completely eliminating the risk of warping, dry rot, and termitic attack inherent to solid timber in desert environments.
With major arterial routes like King Fahd Road, Northern Ring Road, and Makkah Al Mukarramah Road expanding alongside high-density mixed-use developments, acoustic pollution has become a primary comfort metric for property buyers. Window Wurx engineered single windows feature asymmetric double-glazed acoustic laminated glass (e.g., 6mm Clear + 1.52mm PVB + 8mm Low-E) configured to damp city traffic frequencies, reducing noise levels by up to 45 decibels.
Answers to common questions raised by Saudi contractors, architects, and importers when sourcing aluminium single windows and door systems from China.
Yes. Our thermal break aluminium single window series can be custom-configured to meet or exceed SBC 601 energy efficiency standards. By combining our 24mm/34mm PA66 polyamide thermal barrier profiles with high-performance double-silver Low-E double glazing, we achieve overall window U-values below 1.5 W/m²K and SHGC values below 0.18, fully compliant with Saudi energy conservation codes for Zone 1 regions like Riyadh.
Window Wurx has extensive experience exporting structural building materials into the Kingdom of Saudi Arabia. We provide complete factory technical documentation, test reports, and quality assurance certificates required for issuing Product Certificates of Conformity (PCoC) and Shipment Certificates of Conformity (SCoC) via the SABER online platform, ensuring fast, hassle-free customs clearance at Dammam Port, King Abdulaziz Port, or Riyadh Dry Port.
We utilize Qualicoat Class 2 and Class 3 architectural grade powder coatings (including AkzoNobel Interpon and Jotun powder formulations). These coatings undergo rigorous 3,000-hour accelerated QUV testing to ensure superior resistance against color fading, gloss loss, chalking, and sand abrasion caused by dust storms in central Saudi Arabia.
To prevent scratch damage, glass fracture, or frame deformation during ocean transit and overland hauling to Riyadh, every window unit is wrapped in protective PE film, reinforced with heavy-duty paper corner guards, wrapped in bubble wrap, and sealed in non-fumigation plywood crates with internal rubber shock damping.
Absolutely. Every single window and architectural glazing system is made-to-measure according to your project shop drawings. We offer specialized frame geometry including arches, triangles, corner-joined windows, and dual-tone finishes (such as 3D woodgrain interior with dark bronze architectural powder coat exterior).
Standard factory production lead time is 25 to 35 calendar days following shop drawing sign-off and deposit receipt. Ocean shipping from Shenzhen or Guangzhou ports to Dammam/Jeddah ports typically takes 18 to 22 days, followed by 3 to 5 days for customs transit and overland trucking to Riyadh site locations.
Get direct factory pricing, structural shop drawings, and thermal performance estimations from our senior engineering team today.